In speed frame machines twist per unit is varied with the variation of raw material and its different parameters. This variation of twist is inserted by changing a wheel that is connected with the main driving shaft named twist change pinion (TCP). And the multiply of TCP and TPI, present in a machine is called twist constant. This value is applicable for any required twist with corresponding TCP. So we can find out the required TCP to get a given TPI. The generalize formulae is as below:
Thursday, May 17, 2012
8:03 PM
Twist Constant of the Speed Frame / Simplex M/C / Roving Frame Machine | Calculation of Twist, Twist Constant of the Speed Frame Machine
bobbin. For a fibrous material twist is measured by the parameter twist per inch (TPI), twist per centimeter or twist per meter (TPM). For the cotton sample twist is measured by TPI.
Specification:
- Front roller carrier wheel :80T(A)
- Twist constant change pinion carrier:30T(B)
- Twist constant change pinion:30T(C)
- Twist change pinion:28T(D)
- Sprocket wheel:34T(E)
- Sprocket pinion:36T(F)
- Spindle carrier wheel:40T(G)
- Spindle wheel:22T(H)
GEARING DIAGRAM:
 |
| Fig: Gearing diagram of speed frame |
Calculation:
Result:
Twist per inch TPI → 1.56
Required TCP → 33
Twist per inch TPI → 1.56
Required TCP → 33
Conclusion:
Speed frame is the first machine which enables the winding of the fibrous material on to a package. From this machine the fibre gets a circular shape which is very advantageous to be used in ring spinning. So the importance of this machine is very much. In this experiment we indicate different gearing diagram of the twist inserting portion; specify it and calculate twist and twist constant. We found a satisfactory result. So the experiment is a successful one.
Subscribe to:
Post Comments (Atom)
No Comments
***www.TextileTune.blogspot.Com***