Two draw the yarn path diagram of this machine.
To know about the gearing diagram of this machine for production calculation of this machine with the help of gearing diagram.
Different parts of this machine is given bellow:
1. Latch needle:
Thursday, May 17, 2012
.
This type of needle has a special sliding latch with other common features. This part is used to form loops.
2. Cams:
There are three types of cams:
a. Knit cam: T
his cam helps needle to form knit loops.
b. Tuck cam:
b. Tuck cam:
This cam helps needle to form tuck loops.
c. Miss cam:
c. Miss cam:
This cam helps needle to form miss loops.
3. Sinker:
 |
| Yarn Path Diagram of single jersey circular knitting machine |
3. Sinker:
There are three types of sinkers:
a. Loop forming sinker:
This sinker is used to sink or kink the newly laid yarn.
b. Holding down sinker:
This sinker is used to hold down the old loops.
c. Knocking-over sinker:
This sinker supports the old loop as the new loop is drawn through it.
4. Feeding unit :-
A feeder supplies yarn to needles. A positive feeder contains the following parts:
a. Knot catcher:
This part finds any fault in yarn.
b. Yarn tensioner:
b. Yarn tensioner:
This part gives proper tension to yarn for proper knitting.
(5) Timing belt/Tooth belt:
This part helps machine to stop immediately.
6. VDQ Pulley:
6. VDQ Pulley:
This part is used to control stitch length of the knitted fabric.
7. Cylinder:
This frame contains needles, cams, jacks and sinkers.
8. Sinker Ring:
Sinkers are placed on the sinker cam in the sinker ring.
9. Needle Detector:
This part detects the any type of faults of needles.
10. Fabric Detector:
This part detects any fault of fabric.
11. Adjustable Fan:
This part removes lint, hairy fibre from yarn and others.
12. Take up Roller:
This part is used to take up the fabric from cylinder.
13. Cloth Roller:
The final product i.e. cloth is wound on this roller.
14. Expander:
This part is used to control the width of fabric.
16. Creel:
This part is used to contain yarn packages.
Conclusion:
To drive a machine properly and to get the maximum product from a machine it is very essential to know very well about its different parts and their controls. This practical helps me to know about the different parts of a single jersey knitting machine and their functions. So I think it will be very helpful in my future career
Subscribe to:
Post Comments (Atom)
No Comments
***www.TextileTune.blogspot.Com***