Jute Spreader machine
Parts in Jute Spreader machine:
i. Lead roller;
ii. Fluted feed;
iii. Feed sheet;
iv. Lantern roller;
v. Gill bed;
vi. Conduction plate & emulsion tray.
vii. Roll forms.
viii. Fast & slow chain.
Working Principle of Jute Spreader Machine:
This machine consists of two sections a slow chain and fast chain. Jute is fed manually on the feed lattice and this regulated by a slave points.
After feeding the materials enters the slow section via a pair of fluted jute spreads machine feed rollers.
In slow section, it is carried over a slow moving gill bed or pin bed. The fibers are pressed on this pin bed by 3 heavy lantern rollers. This gill bed contains 32 gill bars.
Then the material goes to fast section or combing section which is formed by a gill bed with 10-12 times faster than slow section generally draft in 10.
The jute goes to conductor plate while emulsion is applied it.
After emulsion jute is received by a null former in roll form.
Advantages:
i. Here lead / draft is more.
ii. Possibility of penetration of fibre in gill bed is more.
iii. It produced best quality jute.
Conclusion:
i. Jute spreades machine is influence on quality..
ii. The open and comb the pieced out jute the machine is used.
iii. Jute spreades prepare ribbon live sliver.
No Comments
***www.TextileTune.blogspot.Com***