Wednesday, May 16, 2012
the physical properties of many materials (especially thermoplastics) can vary depending on ambient temperature, it is sometimes appropriate to test materials at temperatures that simulate the intended end use environment.
Flexural Property of Textile Material
The behavior which shows by textile material during bending is called flexural property.
1. Flexural rigidity
2. Bending recovery
3. Bending modulus
1. Flexural rigidity:
Flexural rigidity is the stiffness of a textile fiber. It can be defined as the couple needed to bend a fiber.Mathematically, Flexural rigidity = (1/4π) (ηET2/ρ)
Where,
η = shape factor,
E = specific shear modulus,
T =linear density (Tex),
ρ = density (gm/cm3)
Specific flexural rigidity:
Specific flexural rigidity can be defined as the flexural rigidity of linear density.
Mathematically, Specific flexural rigidity = (1/4π)(ηE/ρ)
Where,
η = shape factor,
E = specific shear modulus,
ρ = density (gm/cm3)
2. Bnding recovery:
The recovery from a given curvature is called bending recovery.Say, nylon shows 100% recovery from small curvature of 15D, where it shows 20% recovery from large curvature.
Unit = N-m2/ Tex.
3. Shape factor:
Shape factor is a number that indicates the shape of a fiber. Shape is expressed by “η”.If, η = 1, it indicates the shape of fiber is round.
If,
η > 1, it indicates the shape of fiber is increased.If,
η < 1, it indicates the shape of fiber is decreased.
Label :
Yarn
5
Textile Technology: Flexural Property of Textile Fiber
the physical properties of many materials (especially thermoplastics) can vary depending on ambient temperature, it is sometimes appropriate...
Subscribe to:
Post Comments (Atom)
No Comments
***www.TextileTune.blogspot.Com***