produce interlock structure. Interlock structure is produce by special cylinder dial circular machines. Double system V-bed flat knittingmachine also used to produce interlock structure.
Machine specification:
Brand: FUKUHARA
Model: V8ME42
Origin: Japan
Manufacturing Company: Precision Fukuhara Works. Ltd.
Serial: 1352761
Dia of cylinder: 30 inch
Machine description:
The machine has two sets of needles on two different beds, one set on cylinder one in the dial bed. These two sets of needles must be exactly opposite to each other.
The machine has two separate cam system in each bed needles of different length called short needles and long needles. Each cam system controls half of the needles in alternate sequences. One cam system controls knitting at one feeder and other ca, system controls at the next feeders. T ale down mechanism is the same as the other Interlock and plain machines mechanism.
Machine parts:
- Yarn career
- Break stop motion
- Yarn guides
- Dial
- Cylinder
- Dial cams
- Cylinder cams
- Dial needles
- Cylinder needles
- Oiling and air following devices
- Sensors
- Take up rollers
- Batch rollers
- Motor
- Belts
- Pulleys and gears
- Clutches
Interlock cam system:
In the figure the cylinder and dial cam to produce one course of ordinary interlock fabric which is actually work of two knitting feeders.The cylinder cam:
A → clearing cam which lifts the needles to clear the old loop
B, C → stitch cam and guard cams respectively both vertically adjustable to control the stitch length.
D → up through to rise the needle whilst dial needle knock over
E, F → guard cam to complete the truck
G, H → guide cam to provide the track for idling needles
The dial cam system:
Raising cam for tuck position only
2, 3. Dial knock over cam
4. Guard cam to compete the truck
Auxiliary knock over cam to prevent the dial needle reentering the old loop
6, 7 Guide cams provides the tracks for idling needles
8. Sewing type clearing cam which may occupy the knitting position as shown in feeder 1 or in tuck position at feeder 2.
Knitting action:
The knitting cycle of a interlock machine can be divided in to eight headings. They are discussed below,
Position – 1: rest position
Position – 2: tucking position of dial needle
Position – 3: tucking position
Position – 4: clearing position of dial needle
Position – 5: clearing position
Position – 6: yarn presenting position
Position – 7: cast on position
Position – 8: knock over position
No Comments
***www.TextileTune.blogspot.Com***